Inquiry 繁體中文 简体中文
Crystal Oscillators
無標題文件 Crystal Oscillators
Output Logic /Waveform Product Series Product Description Available Frequency Rangee Pdf spec. sheet by Supply Voltages (volts)
CMOSHBProgrammable clocks for quick-turn1.0 ~ 200.0 MHz1.8 V2.5 V3.3 V
CMLHQJFHigh Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical50~2100MHz1.8 V2.5 V3.3 V
CMOSHA● HAxx series features AT-cut crystal for it's high frequency stability while enjoys uA low current consumption that would normally only available from X-cut tuning forl crystal .
32.768 KHz is popular for Real Time Clock and other timing applications .
● For even tighter frequency stability ( ± 5 ppm over -40 to 85 °C ) and lower current consumption ( 1.2 uA at 3.3V ) , please contact Mercury .
10.0 ~ 100.0 KHz1.8 V2.5 V3.3 V
HCTQFQuick Turn Dual output Oscillators. 10~245MHz 1.5ps(typical)10 ~ 245 MHz2.5 V3.3 V
HJ●Mercury's HJ Series is an ultra low phase noise crystal clock oscillator providing a much better phase noise & jitter performance, compared to standard clocks .
● With an output frequency of 49.152MHz, the phase noise jitter is 48 fsec (RMS, 12 KHz to 20 MHz) with a supply voltage (VDD) of +3.3V applied
20.0 ~ 50.0 MHz1.8 V2.5 V3.3 V
HKUltra Low Current clocks. 2.7 mA for 50 MHz at 1.8V. And 5 mA at 3.3V0.25 ~ 50.0 MHz1.8 V2.5 V3.3 V
HMEMI Reducion Spread Spectrum Clocks (SSXOs)3.5 ~ 220.0 MHz3.3 V
HNWide Operating Temperature range from -55 °C to +125 °C1.75 ~60.0 MHz1.8 V2.5 V3.3 V5.0 V
HTQFQuick-Turn clock oscillators. 10~245MHz. 1.0ps(typical)10 ~ 245 MHz2.5 V3.3 V
HTQNQuick-Turn clock oscillators. 10~245MHz. 1.0ps(typical)10 ~ 245 MHz2.5 V3.3 V
H, SWOGeneral purpose clocks. Low cost, Excellent phase noise and jitter, High performance20.0 KHz ~ 160.0 MHz 1.0 V1.5 V1.8 V2.5 V3.3 V5.0 V
HCSLHCJFHigh Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical 150~700MHz1.8 V2.5 V3.3 V
HCK●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz.13.5 ~ 200.0 MHz2.5 V3.3 V
LVDSHCDQFQuick Turn Dual output Oscillators. 10~1450MHz 1.5ps(typical)10 ~ 1450 MHz2.5 V3.3 V
HDFUses a High-Q fundamental crystal and a low jitter multiplier38 ~ 640 MHz2.5 V3.3 V
HDJFHigh Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical150~2100MHz1.8 V2.5 V3.3 V
HDK●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz.13.5 ~ 200.0 MHz2.5 V3.3 V
HDQFQuick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical)10 ~ 1450 MHz2.5 V3.3 V
HDQNQuick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical)10 ~ 1450 MHz2.5 V3.3 V
LVPECLHCPQFQuick Turn Dual output Oscillators. 10~1450MHz 1.5ps(typical)10 ~ 1450 MHz2.5 V3.3 V
HPFUses a High-Q fundamental crystal and a low jitter multiplier38 ~ 640 MHz2.5 V3.3 V
HPJFHigh Frequency Ultra-low Jitter Crystal Oscillators RMS Jitter 150 fsec typical150~2100MHz2.5 V3.3 V
HPK●200 fs typical Integrated Phase Jitter (12KHz~20 MHz) ●Phase Noise at 100 KHz offset: -144 dBc/Hz for 125 MHz.13.5 ~ 200.0 MHz2.5 V3.3 V
HPQFQuick-Turn clock oscillators. 10~1450MHz. 0.6ps(typical)10 ~ 1450 MHz2.5 V3.3 V
HPQNQuick-Turn clock oscillators. 10~1450MHz. 1.0ps(typical)10 ~ 1450 MHz2.5 V3.3 V
True SineHS50 ohms load. Multiplier is used for 55+ MHz10.0 ~ 800.0 MHz3.3 V5.0 V
HSR10K ohm // 10 pF. No multiplier10.0 ~ 52.0 MHz3.3 V5.0 V